Reading Time: 4 minutes

“SCADA tells us what our infrastructure is reporting. CCTV allows us to see what it is actually doing. When we combine the intelligence of instrumentation with the confidence of visual observation, we give utility operators something invaluable: a clearer understanding of the systems they control, the decisions they make, and the communities they serve.” – MJ Martin

The Missing Dimension of Situational Awareness

Across Canada, smaller electricity, water, and natural gas utilities face an engineering challenge.  They must operate geographically dispersed infrastructure with limited personnel, modest budgets, and increasing expectations for reliability.

SCADA has transformed remote utility operations by providing telemetry, alarms, equipment status, and supervisory control.  Yet SCADA has an inherent limitation.  It communicates what instruments report, but cannot necessarily reveal what is physically occurring.

Consider an aircraft cockpit.  Instruments provide essential information about the aircraft, but no pilot would willingly surrender the ability to look outside.  Utility operators deserve that same additional perspective.

Combining SCADA with Visual Intelligence

Integrating closed-circuit television (CCTV) with SCADA introduces a valuable second source of operational information.

Imagine an operator remotely commanding a motor-operated disconnect switch at an unattended electrical substation.  SCADA confirms the command was transmitted and reports a change in the associated position indication.  But what actually happened?

A strategically positioned camera can reveal whether the switch mechanism moved, whether visible blades reached their intended position, and whether an obstruction or abnormal condition exists.

Importantly, visual observation supplements rather than replaces independent position contacts, electrical measurements, interlocks, and established switching procedures.  A camera cannot establish that equipment is de-energized.

The engineering principle is straightforward.  Multiple independent observations improve diagnostic confidence.

https://share.google/CMdgADcEeZC94OW21

Industry research published in T&D World⁠ identifies remote switching observation, abnormal equipment detection, and operational situational awareness as practical applications of substation video monitoring.

Beyond Electrical Switching

The same principle extends across utility infrastructure.

At a water pumping station, operators can correlate abnormal pressure or flow readings with visible flooding, equipment conditions, or unauthorized entry.  At natural gas regulating stations, cameras can assist with visual site assessment, although they cannot replace gas detection instruments.

More sophisticated installations can incorporate thermal imaging to identify abnormal surface temperatures associated with equipment deterioration.

The objective is not continuous human observation of hundreds of video feeds.  It is event-driven visualization, where a significant SCADA alarm automatically presents the appropriate camera.

Engineering Economics and Cybersecurity

For smaller utilities, the financial argument is compelling.

A single camera installation can support operational troubleshooting, remote inspection, incident investigation, and physical security.  Avoiding unnecessary truck rolls, improving dispatch decisions, and shortening fault investigations can strengthen the business case.

Security provides an additional dividend.  In December 2025, BC Hydro⁠ reported 24 copper theft and mischief incidents involving maintenance holes since January 2024, compared with five during the preceding two years.

However, integration must be engineered carefully.  Video bandwidth, latency, network segregation, backup power, and cybersecurity require deliberate design.  The Canadian Centre for Cyber Security⁠ emphasizes network isolation, access controls, and secure operational technology architectures.

Video traffic must never compromise time-critical protection or control communications.

Engineering a More Intelligent Grid

I believe CCTV deserves serious consideration as an extension of utility operational technology, particularly for smaller Canadian distribution utilities.

Our industry has invested heavily in knowing what equipment is reporting.  We should now consider the value of observing what equipment is actually doing.

SCADA provides the instruments.  CCTV provides the eyes.  Together, they can give utility operators a more complete understanding of the infrastructure entrusted to their care.


About the Author:

Michael Martin is the Vice President of Technology with Metercor Inc., a Smart Meter, IoT, and Smart City systems integrator based in Canada. He has more than 40 years of experience in systems design for applications that use broadband networks, optical fibre, wireless, and digital communications technologies. He is a business and technology consultant. He was a senior executive consultant for 15 years with IBM, where he worked in the GBS Global Center of Competency for Energy and Utilities and the GTS Global Center of Excellence for Energy and Utilities. He is a founding partner and President of MICAN Communications and before that was President of Comlink Systems Limited and Ensat Broadcast Services, Inc., both divisions of Cygnal Technologies Corporation (CYN: TSX).

Martin served on the Board of Directors for TeraGo Inc (TGO: TSX) and on the Board of Directors for Avante Logixx Inc. (XX: TSX.V).  He has served as a Member, SCC ISO-IEC JTC 1/SC-41 – Internet of Things and related technologies, ISO – International Organization for Standardization, and as a member of the NIST SP 500-325 Fog Computing Conceptual Model, National Institute of Standards and Technology. He served on the Board of Governors of the University of Ontario Institute of Technology (UOIT) [now Ontario Tech University] and on the Board of Advisers of five different Colleges in Ontario – Centennial College, Humber College, George Brown College, Durham College, Ryerson Polytechnic University [now Toronto Metropolitan University].  For 16 years he served on the Board of the Society of Motion Picture and Television Engineers (SMPTE), Toronto Section. 

He holds three master’s degrees – in business (MBA), communication (MA), and education (MEd). As well, he has three undergraduate diplomas and seven major certifications in business, computer programming, internetworking, project management, media, photography, and communication technology. He has completed over 80 next generation MOOC (Massive Open Online Courses) [aka Micro Learning] continuous education programs in a wide variety of topics, including: Economics, Python Programming, Internet of Things, Cloud, Artificial Intelligence and Cognitive systems, Blockchain, Agile, Power BI, Big Data, Design Thinking, Security, Indigenous Canada awareness, and more.

Martin is a volunteer, a photographer, a pilot, a learner, a technologist, a philosophizer, and a romantic optimist.